# Creation of a Synthetic Rock Mass (SRM) Specimen Tutorial

**URL:** <https://forum.itascainternational.com/t/creation-of-a-synthetic-rock-mass-srm-specimen-tutorial/1868>\
**Category:** PFC\
**Created:** [December 27, 2024, 11:19am UTC](https://forum.itascainternational.com/t/creation-of-a-synthetic-rock-mass-srm-specimen-tutorial/1868 "2024-12-27T11:19:54Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![eneszengin](https://yyz1.discourse-cdn.com/flex031/user_avatar/forum.itascainternational.com/eneszengin/32/58_2.png) [@eneszengin](https://forum.itascainternational.com/u/eneszengin)\
**Post date:** [December 27, 2024, 11:19am UTC](https://forum.itascainternational.com/t/creation-of-a-synthetic-rock-mass-srm-specimen-tutorial/1868/1 "2024-12-27T11:19:54Z")

</div>

Hi everyone,

In the discussion section of the tutorial, it says, _“Contacts intersecting fractures are assigned the smoothjoint contact model, and their properties are set.”_ However, I couldn’t find anything about this in the .dat files about setting properties. Am I missing something?

Thanks!

[Creation of a Synthetic Rock Mass (SRM) Specimen — PFC 7.0 documentation](https://docs.itascacg.com/pfc700/pfc/docproject/source/manual/examples/tutorials/fractured_rock/fractured_rock.html)

---

<div class="post-metadata">

**Author:** ![dblanksma](https://avatars.discourse-cdn.com/v4/letter/d/858c86/32.png) [@dblanksma](https://forum.itascainternational.com/u/dblanksma)\
**Post date:** [January 2, 2025, 6:59pm UTC](https://forum.itascainternational.com/t/creation-of-a-synthetic-rock-mass-srm-specimen-tutorial/1868/2 "2025-01-02T18:59:03Z")

</div>

Hello @eneszengin,  
It looks like that is an incorrect statement in the tutorial. The contacts intersecting the fractures are assigned the smooth-joint contact model with the **fracture contact-model model ‘smoothjoint’ install** command. However, to actually assign properties you would need to use the [fracture property](https://docs.itascacg.com/pfc700/common/dfn/doc/dfn_manual/dfn_commands/cmd_fracture_property.html?node1410) command.

---

<div class="post-metadata">

**Author:** ![eneszengin](https://yyz1.discourse-cdn.com/flex031/user_avatar/forum.itascainternational.com/eneszengin/32/58_2.png) [@eneszengin](https://forum.itascainternational.com/u/eneszengin)\
**Post date:** [January 2, 2025, 7:33pm UTC](https://forum.itascainternational.com/t/creation-of-a-synthetic-rock-mass-srm-specimen-tutorial/1868/3 "2025-01-02T19:33:24Z")

</div>

Thanks a lot! I will look into it.
