# Effective Voronoi size

**URL:** <https://forum.itascainternational.com/t/effective-voronoi-size/890>\
**Category:** UDEC\
**Created:** [January 17, 2023, 11:02am UTC](https://forum.itascainternational.com/t/effective-voronoi-size/890 "2023-01-17T11:02:21Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![venkateshmd](https://avatars.discourse-cdn.com/v4/letter/v/9de053/32.png) [@venkateshmd](https://forum.itascainternational.com/u/venkateshmd)\
**Post date:** [January 17, 2023, 11:02am UTC](https://forum.itascainternational.com/t/effective-voronoi-size/890/1 "2023-01-17T11:02:21Z")

</div>

Hello,  
I have a model wherein I have used 5 mm Voronoi edge length and 3 mm joint spacing as shown below. Since joints are spaced 3 mm apart, Voronoi polygon side length will be less than 5 mm. Is there a way to find effective Voronoi size or average Voronoi polygon size? Thank you

 ![Model1-Size1.67-A30](https://canada1.discourse-cdn.com/flex031/uploads/itasca/original/1X/3bd2036b6bfb56cdbcf46978fe69912e58149fac.png)

---

<div class="post-metadata">

**Author:** ![jmswdmn](https://avatars.discourse-cdn.com/v4/letter/j/51bf81/32.png) [@jmswdmn](https://forum.itascainternational.com/u/jmswdmn)\
**Post date:** [January 17, 2023, 11:17am UTC](https://forum.itascainternational.com/t/effective-voronoi-size/890/2 "2023-01-17T11:17:00Z")

</div>

The command **block list maxima** will give you a list of min., max., av. values for block data. Is that what you’re after?

---

<div class="post-metadata">

**Author:** ![venkateshmd](https://avatars.discourse-cdn.com/v4/letter/v/9de053/32.png) [@venkateshmd](https://forum.itascainternational.com/u/venkateshmd)\
**Post date:** [January 17, 2023, 11:42am UTC](https://forum.itascainternational.com/t/effective-voronoi-size/890/3 "2023-01-17T11:42:39Z")

</div>

Average area of the block works for me. Thank you.  
If there is any command, which can give me average block edge length, that would be even better.