# Having problem in geometery

**URL:** https://forum.itascainternational.com/t/having-problem-in-geometery/1609
**Category:** PFC
**Tags:** tips
**Created:** [August 1, 2024, 9:00am UTC](https://forum.itascainternational.com/t/having-problem-in-geometery/1609 "2024-08-01T09:00:59Z")
**Posts on this page:** 1
**Page:** 1

<div class="post-metadata">

### Author: ![ShivamPandey](https://avatars.discourse-cdn.com/v4/letter/s/f4b2a3/32.png) [@ShivamPandey](https://forum.itascainternational.com/u/ShivamPandey)
#### Post date: [August 1, 2024, 9:00am UTC](https://forum.itascainternational.com/t/having-problem-in-geometery/1609/1 "2024-08-01T09:00:59Z")

</div>

I am using this code:  
model new  
model large-strain on  
model title ‘Nigahi Slope’  
model domain extent -110 500 -30 280 condition destroy  
geometry import ‘abfbda.dxf’

Not getting any error but showing this:  
pfc2d\>geometry import ‘abfbda.dxf’

for code:280 for variable:$INTERSECTIONDISPLAY in HEADER section the code should be:290 (at line 971)

DXF import: total processed #lines: 19798, #lines used in input: 24

Entities supported for import: ARC, CIRCLE, LINE, POINT, 3DFACE, POLYLINE, LWPOLYLINE, VERTEX

— 0 nodes, 0 edges, and 0 polygons added to geometry set abfbda.  
May I know what is wrong with my geometry it is 2 D slope design.

Geoemtery file is here:  
[https://drive.google.com/file/d/1GUioSlKgAOpTk-XGfDWkXYR5eLsDGvia/view?usp=sharing](https://drive.google.com/file/d/1GUioSlKgAOpTk-XGfDWkXYR5eLsDGvia/view?usp=sharing)