# Rock Cutting PFC2D

**URL:** <https://forum.itascainternational.com/t/rock-cutting-pfc2d/1062>\
**Category:** PFC\
**Created:** [June 22, 2023, 1:28pm UTC](https://forum.itascainternational.com/t/rock-cutting-pfc2d/1062 "2023-06-22T13:28:17Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Sauki](https://avatars.discourse-cdn.com/v4/letter/s/c5a1d2/32.png) [@Sauki](https://forum.itascainternational.com/u/Sauki)\
**Post date:** [June 22, 2023, 1:28pm UTC](https://forum.itascainternational.com/t/rock-cutting-pfc2d/1062/1 "2023-06-22T13:28:17Z")

</div>

Hello, Everyone

I am just learning to use PFC2D software. have anyone done a rock cutting process like this video [PFC2D Rock Cutting (Dry case) - YouTube](https://www.youtube.com/watch?v=Eq1DYEEBHlM)?  
Is anyone have any documents/tutorials on how to do that? I have seen PFC documentation on Itasca website but I can not find anything.

Thankyou.  
Best regards, Sauki

---

<div class="post-metadata">

**Author:** ![KMeerwald](https://avatars.discourse-cdn.com/v4/letter/k/ee59a6/32.png) [@KMeerwald](https://forum.itascainternational.com/u/KMeerwald)\
**Post date:** [June 27, 2023, 10:40pm UTC](https://forum.itascainternational.com/t/rock-cutting-pfc2d/1062/2 "2023-06-27T22:40:31Z")

</div>

Hi Sauki. Following is a link to an excerpt on our website which may be of use - [PFC (Particle Flow Code): Rock Cutting Excerpt | Itasca International](https://www.itascainternational.com/technical-papers/pfc-particle-flow-code-rock-cutting-excerpt)

---

<div class="post-metadata">

**Author:** ![Sauki](https://avatars.discourse-cdn.com/v4/letter/s/c5a1d2/32.png) [@Sauki](https://forum.itascainternational.com/u/Sauki)\
**Post date:** [June 28, 2023, 4:27am UTC](https://forum.itascainternational.com/t/rock-cutting-pfc2d/1062/3 "2023-06-28T04:27:53Z")

</div>

Hello KMeerwald,  
Thankyou so much for your reply,

I have seen the document that you mention it. But the problem that i did not understand is how to make the **script** for that Rock Cutting Process, can you help me where do i get the **tutorial script** for that process? Or do you have a contact or an email that capable of to help me solve the problem?

Thaks indeed for your time and help,  
Sauki