# Subcontact after block fill does does not generate forces

**URL:** <https://forum.itascainternational.com/t/subcontact-after-block-fill-does-does-not-generate-forces/1897>\
**Category:** 3DEC\
**Created:** [January 15, 2025, 12:14pm UTC](https://forum.itascainternational.com/t/subcontact-after-block-fill-does-does-not-generate-forces/1897 "2025-01-15T12:14:13Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![xpnguyen](https://avatars.discourse-cdn.com/v4/letter/x/258eb7/32.png) [@xpnguyen](https://forum.itascainternational.com/u/xpnguyen)\
**Post date:** [January 15, 2025, 12:14pm UTC](https://forum.itascainternational.com/t/subcontact-after-block-fill-does-does-not-generate-forces/1897/1 "2025-01-15T12:14:13Z")

</div>

Hello,

In 3DEC V7.00.146, after reactivating, with the command “block fill”, concrete support of a tunnel, which has been deactivated upon tunnel excavation with the command “block excavate”, I see that many subcontacts do not have forces (normal and shear) and state, even though joint model and contact properties have been defined, and there’s non-null relative displacements. Below is an example of information of such a subcontact:

Subcontact 729439  
Subcontact: 729439  
Contact: 4304445  
Location: (30.6171,7.30467,444.792)  
Blocks: 19184,110614  
Groups: None  
Constitutive model: mohr  
Fracture ID: 0  
Area: 0.153308  
**Normal force: 0**  
**Shear force: (0,0,0)**  
**State:**  
Rel Normal disp: -0.00438345  
Rel Shear disp: (0.01563,-0.00174322,-0.000829532)  
Fortran Offset: 1241423929

While other subcontacts similarly defined do have contact forces and state, such as:

Subcontact 729564  
Subcontact: 729564  
Contact: 14844384  
Location: (25.3671,9.55036,435.274)  
Blocks: 451001,192343  
Groups: None  
Constitutive model: mohr  
Fracture ID: 0  
Area: 0.258712  
**Normal force: 0.857327**  
**Shear force: (0.103411,0.00327523,0)**  
**State: slip-p**  
Rel Normal disp: -0.000192664  
Rel Shear disp: (-2.32628e-05,-7.26091e-07,0)  
Fortran Offset: 1241429554

What could be the common reason for and how to correct this ?

Cheers,

---

<div class="post-metadata">

**Author:** ![jhazzard](https://avatars.discourse-cdn.com/v4/letter/j/4af34b/32.png) [@jhazzard](https://forum.itascainternational.com/u/jhazzard)\
**Post date:** [January 15, 2025, 7:12pm UTC](https://forum.itascainternational.com/t/subcontact-after-block-fill-does-does-not-generate-forces/1897/2 "2025-01-15T19:12:39Z")

</div>

Please send a data file and/or save file to [3decsupport@itascacg.com](mailto:3decsupport@itascacg.com)
