# The pushing force on the pile

**URL:** <https://forum.itascainternational.com/t/the-pushing-force-on-the-pile/1106>\
**Category:** FLAC2D\
**Created:** [August 2, 2023, 1:20pm UTC](https://forum.itascainternational.com/t/the-pushing-force-on-the-pile/1106 "2023-08-02T13:20:31Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Sullivan](https://avatars.discourse-cdn.com/v4/letter/s/9dc877/32.png) [@Sullivan](https://forum.itascainternational.com/u/Sullivan)\
**Post date:** [August 2, 2023, 1:20pm UTC](https://forum.itascainternational.com/t/the-pushing-force-on-the-pile/1106/1 "2023-08-02T13:20:31Z")

</div>

Hello,  
I am using the FLAC2D for simulating my slope engineering, and during the task, I want to simulate the anti-slide pile with pile structure element.  
The question is that: how can we obtain the pushing force acting on the pile element? and the anti-sliding force before the pile?  
Thanks!

---

<div class="post-metadata">

**Author:** ![dblanksma](https://avatars.discourse-cdn.com/v4/letter/d/858c86/32.png) [@dblanksma](https://forum.itascainternational.com/u/dblanksma)\
**Post date:** [August 21, 2023, 4:05pm UTC](https://forum.itascainternational.com/t/the-pushing-force-on-the-pile/1106/2 "2023-08-21T16:05:58Z")

</div>

Hello Sullivan,

If you are applying a force you can get the pushing force from the FISH function `struct.node.apply()`. Information on the function can be found here - [struct.node.apply — Itasca Software 9.0 documentation](https://docs.itascacg.com/itasca900/common/sel/doc/manual/sel_manual/nodes/fish/sel.node_intrinsics/fish_sel.node.apply.html?node1793)

If you are interested in the generalized forces acting on an element you can use the FISH function `struct.force.nodal()`. Information on the function can be found here - [struct.force.nodal — Itasca Software 9.0 documentation](https://docs.itascacg.com/itasca900/common/sel/doc/manual/sel_manual/sel_fish/sel_intrinsics/fish_sel.force.nodal.html?node1940)

If you wish to monitor the pile force response while cycling, I’d suggest using the `structure pile history` command and select the appropriate _force_ keyword. ([structure pile history command — Itasca Software 9.0 documentation](https://docs.itascacg.com/itasca900/common/sel/doc/manual/sel_manual/piles/commands/cmd_structure.pile.history.html?node1531))

---

<div class="post-metadata">

**Author:** ![Sullivan](https://avatars.discourse-cdn.com/v4/letter/s/9dc877/32.png) [@Sullivan](https://forum.itascainternational.com/u/Sullivan)\
**Post date:** [August 22, 2023, 1:27am UTC](https://forum.itascainternational.com/t/the-pushing-force-on-the-pile/1106/3 "2023-08-22T01:27:26Z")

</div>

Gotcha!Thanks very much for your reply!
