# Total Strain Increment in FLAC2D

**URL:** <https://forum.itascainternational.com/t/total-strain-increment-in-flac2d/1710>\
**Category:** FLAC2D\
**Created:** [September 21, 2024, 3:01am UTC](https://forum.itascainternational.com/t/total-strain-increment-in-flac2d/1710 "2024-09-21T03:01:32Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![SamVarun10](https://avatars.discourse-cdn.com/v4/letter/s/b782af/32.png) [@SamVarun10](https://forum.itascainternational.com/u/SamVarun10)\
**Post date:** [September 21, 2024, 3:01am UTC](https://forum.itascainternational.com/t/total-strain-increment-in-flac2d/1710/1 "2024-09-21T03:01:32Z")

</div>

Hello everyone,  
I want to ask what does the quantity tsi and tsr convey in FLAC2D is. Currently, I am using the version 8.0, and this is the contour option for tsi and tsr. I cannot create a plot or history for tsi and tsr:  
 ![image](https://canada1.discourse-cdn.com/flex031/uploads/itasca/original/2X/b/b5e4555a1a0a6cba51c4a9acf2d073cf251d9dbb.png)  
I tried calculating incremental principal elastic strain using strain invariant J2 and obtained incremental plastic strain using e\_plastic. I tried to add them but that also didn’t serve the purpose. I tried looking in the manual but couldn’t find anything about this. Can anyone please convey this?  
Thanking You.

---

<div class="post-metadata">

**Author:** ![jwang](https://avatars.discourse-cdn.com/v4/letter/j/b782af/32.png) [@jwang](https://forum.itascainternational.com/u/jwang)\
**Post date:** [September 23, 2024, 6:03pm UTC](https://forum.itascainternational.com/t/total-strain-increment-in-flac2d/1710/2 "2024-09-23T18:03:33Z")

</div>

The tsr/tsi is equal to sqrt (e11^2+e22^2+e33^2+e12^2) (note for plane strain, e33=0), where e11/exx is the strain component in x direction and e22/eyy is the strain component in y direction and e33/ezz is the strain component in z direction. The formulation is used in a model where damage is a combination of tensile and shear failures, and the best criterion to represent damage is “total” strain. The tsr/tsi can be used for contour plot in FLAC8, but not available for history/fish function. You can use fsr()/fsi() intrinsic fish functions to compute the total strain, please check Fish manual Section _2.5.3.3 Strain Calculations_ on page 2-47 for details.
